Attack on Titan Eren vs Jaw Titan Figure: Display & Care Tips
By Explore | OTAKU.STUDIO | Published: 2026-11-05
Category: Tips & Perawatan
A step-by-step routine for displaying, dusting, and safely cleaning the 29cm Eren vs Jaw Titan PVC figure — including flame-effect care and base checkpoints.
Quick answer
Display your 29cm Eren vs Jaw Titan figure on a stable shelf away from direct sun and heat, dust it every two to three weeks with a soft brush, and clean the PVC only with a barely damp cloth — never soak the battle base or flame effect.
Why the flame effect and battle base change your care routine
Most PVC figure guides focus on a single character on a plain stand. This figure adds a battle base and a flame effect, which means more edges, crevices, and thin sections that collect dust and can snag on cloths. Treat the flame effect as the most fragile part of the piece: support it from the base when you move the figure, and never lift the figure by the flame or by Eren's outstretched limbs.
The figure ships without its original box. That is normal for garage-kit-style packaging, but it also means you should inspect it carefully on arrival and set up a safe display spot before unboxing, since you won't have molded inserts for everyday storage.
Placement rules that prevent leaning and fading
PVC softens and can lean over time when exposed to sustained heat, so keep the figure off windowsills, away from radiators, and out of direct sunlight. A shelf at eye level or slightly below reduces dust settling and makes the 29cm height easy to appreciate without crowding nearby items.
Leave a few centimeters of clearance around the flame effect and the Jaw Titan side of the base. Tight shelving or a closed cabinet door that presses against the flame can warp thin sections or chip paint over months of contact.
Step-by-step display and care routine
- Inspect on arrival before placing: Unbox on a clean, soft surface and check the flame effect, base, and Eren's limbs for bends or loose paint. Do not force a bent PVC part straight while cold — warm the room first and apply gentle, slow pressure only if needed. Photograph any damage before assembly so you have a record if you need to contact the store.
- Choose a stable, shaded shelf: Pick a level shelf out of direct sun and away from heat sources, with at least a few centimeters of clearance above and around the flame effect. Avoid high-traffic edges where sleeves or cables can knock the figure. Check that the shelf does not wobble when you press a corner — if it does, move the figure rather than risk a fall.
- Dust every two to three weeks: Use a soft brush or microfiber cloth, working from the top down. Support the flame effect with one hand while brushing around it, and use a dry cotton swab for crevices in the battle base. Skip compressed air — it can drive dust into paint seams and push thin flame sections out of shape.
- Clean PVC with a barely damp cloth only: For fingerprints or light grime, dampen a microfiber cloth with plain water and wring it until nearly dry, then wipe gently and immediately dry with a second cloth. Do not use alcohol, acetone, or household cleaners, and never rinse the figure or base under water. Test any cleaning method on a hidden underside of the base first.
- Add dust protection without trapping moisture: A display case or acrylic cover reduces dust, but leave a small vent or gap so air can circulate. Avoid sealing a recently cleaned figure in an airtight container while any moisture remains. If you use a case, check monthly for condensation or a musty smell and air it out.
- Recheck for leaning every few months: Look at the figure from the side and compare against a photo taken on day one. If Eren or the flame effect starts to lean, move the figure to a cooler spot and reduce direct light exposure. Store the figure upright if you pack it away — never lay it on the flame effect.
Product facts at a glance
- Attack on Titan – Eren Yeager vs Jaw Titan 29cm PVC Figure: 29cm tall (about 11.4 inches) with a battle base and flame effect. Plan shelf height and clearance around the flame before placing it, not after.
Attack on Titan – Eren Yeager vs Jaw Titan 29cm PVC Figure - Attack on Titan – Eren Yeager vs Jaw Titan 29cm PVC Figure: Durable, high-quality PVC construction. PVC responds well to dry dusting and light damp wiping, but it should not be soaked or scrubbed.
- Attack on Titan – Eren Yeager vs Jaw Titan 29cm PVC Figure: Ships securely without the original box, packed for protection. Inspect for loose or bent parts on arrival and set up your display spot before unboxing, since there are no molded inserts for storage.
